http://www.wiihacks.com/recommended-faqs-guides-tutorials-only/60921-guide-softmod-any-wii.html
All files needed is attached here as well:
CHAPTER 1
1. Download MMM-58-61-Hackmii_0.8_BB1.zip, Extract file to sd:\
-Go to wii settings- data managment- channels- SD- Load the boot.dol
-Multi-Mod Manager will load
-Select Wad Manager -Press A
-Press 1, -Press A -Install all Wads
-IOS58 and IOS61 will install
-Press "any button"
-Press 2- load "App Manager"
-Select hackmii_installer_v0.8 -Press A
Hackmii Installer Loads
1. Part 2- Install The HomeBrew Channel and Bootmii
Read the Scam warning and press 1
It may take a minute or two for the "press 1" to appear- be patient
Install the HomeBrew Channel
Install Bootmii as Boot2(boot2 may not be available, IOS installs automatically)
Prepare the SD-card
If Step1 fails with error "no vulnerable ios",
DO THIS
CHAPTER 2
1a. Download Modpack Files
Requires a
standard SD card, 1-2g scandisk is best. SDHC cards will not work
Remove all GC controllers, GC memory cards, USB devices.
Password =
NOT-A-PIRATE
Download the modpack for the region of your wii, or the region you wish your wii to be when your done. Be sure to download to right one.
USA-
ModPack-NTSC-U.zip---------
mirror
EURO-
ModPack-PAL-E.zip---------
mirror
JAP-
ModPack-NTSC-J.zip---------
mirror
KOR-
ModPack-NTSC-K.zip---------
mirror
Be sure to download the region you want your wii to be.
Extract your ModPack to sd:\
1.b Download CIOS-PACK.zip
Extract to sd:\
-mirror
Overwrite files if asked
1.c If you would like to update your wii ios- NOT needed for 4.3 wiis
Download
IOS Update.zip
Extract to sd:\
-mirror
Overwrite files if asked
2. Wad Installs
NOTE: If a wad fails to install, try to install that wad again. If the wad still fails, press B to go back to the main menu, select reload ios, reload ios236, then try to install the wad that is giving you trouble again. DO NOT PROCEED TO THE NEXT STEP UNTIL ALL WADS INSTALL
Start HBC, press [HOME], Launch Bootmii
Multi-Mod Manager Starts (via cboot2)
Never Uninstall IOS, or SM you will brick your wii
Select "WAD Manager" - Press A
Press (1) to "Install all Wads" - Press A
25 wads should install without error
"Press any button to continue"
Be sure all 25 wads install, very important
Mac users may get an error of 25 wads installing and 25 wads failing. There are only 25 wads in the modpack. This issue is caused by the Mac creating extra files and is not an issue.
Do not proceed with error, 25 wads must install
Select the folder "System Menu 4.1" -press A
Press (1) to "Install all Wads" - Press A
3 wads should install without error
"Press any button to continue"
Be sure all 3 wads install, very important
This installs a version patched SM, which I recommend. If this bothers you, don't do it.
WARNING: This is a version patched System Menu, running on a version patched cios60. NEVER replace cios60-v54321 with ios60-6174. Doing so will brick your wii if you update from Nintendo. Never update from Nintendo, don't MUCK up cios60-v54321. You have been warned.
Press B to go back a folder
If updating IOS, Select "IOS-Update" -Press A
Press (1) to "Install all Wads" - Press A
25 wads should install without error
Be sure all 25 wads install, kinda important
IOS are only used by channels and discs loaded from the disc channel. Most of them are never needed.
"Press any button to continue"
If updating wii channels, like the shop channel, Select "Channels" -Press A
Press (1) to "Install all Wads" -Press A
All channel wads should install without error
"Press any button to continue'
Press 2 to load the MMM App Manager
You should now be in the App Manager of MMM
Launch "HomeBrew Channel Loader"
The Homebrew Channel loads
1. Install Priiloader (brick protection, you need this)
You should be in the Homebrew Channel
Launch Priiloader
Priiloader 0.6 Installer will load
Read the warning- Press +/A to install
When finished the HBC should load.
Hold reset on the wii console, keep holding reset- priiloader will load
****If the wii freazes, hold the power down for 10sec.****
****Only install priiloader once, you need to hold reset to load priiloader****
If MMM loads at boot, delete sd:\bootmii from your sd card
Select "System Menu Hacks"- Press A
Enable any hacks you like. I suggest-
"Block Disk Updates", "Block Online Updates", "Remove Diagnostic Disc Check", "Move Disc Channel"
If you don't know what the hack does-
you don't need it.
Select Save settings -Press A
Press B to go back to the main priiloader screen
select "load/install file"
Install USBLoaderCFG.dol
Your wii should now block Disk updates and online updates, you can move the disc channel and if you like autoboot the usbloader.
Optional priiloader settings-
You can set you wii to boot the system menu, HomeBrew Channel, Priiloader, USBloader, and any other app you wish. Settings are found in priiloader, settings. Set the autoboot and return to what you like best.
Example: Set the autoboot and return to installed file, now your wii will autoboot to your USBloader -
Excellent option for those with kids.
CHAPTER 3
Url to this pages:
http://nade.dk/web/nade/site.nsf/FramesetHP?readform&wmain=files/Softmod_Any_Wii