Megui H.264 Conversion Guide
Updated: 07/06/2007 09:24 AM

MeGUI is one of the newer tools that has been designed with H.264 encoding in mind, while supporting other types of conversion, such as XviD. This guide shows you how to encode a H.264 (MP4) using MeGUI from a DVD as the primary example (instructions for converting other types of video files are also included).
This guide is aimed at intermediate users, basically users that are familiar with DVD conversion/backup and want to experiment with H.264 and MeGUI. As such, basic knowledge of DVD ripping and conversion is required, although brief instructions will be provided in any case.
Software you'll need (all freeware):
AVI-Mux_GUI.zipNeroDigitalAudio.zip

Show details for Step 1: InstallationStep 1: Installation

Show details for Step 2: DVD RippingStep 2: DVD Ripping

Hide details for Step 3: D2V CreatorStep 3: D2V Creator

This step will use MeGUI's D2V Creator tool to create a D2V file needed for MeGUI/AviSynth to handle MPEG-2 files. This step is required only for MPEG-2 files - all other types of inputs do not require a D2V file and can be loaded straight into AviSynth and therefore, you can skip this step and go to the next page/step (Step 4: AviSynth Script Creator).
Start MeGUI. I like to first clear the job queues of previously finished jobs. This is optional, but it might help to make things clearer. To do this, click on the "Queue" tab and then click on the "Clear" button.
From the "Tools" menu, select "D2V Creator". In the "Video Input" section, load the first ripped VOB file of the movie titleset (the rest of the files in the set will be loaded automatically). You will get an error message about not being able to find DVD Decrypter generated info files, this is fine (as we did not use DVD Decrypter's IFO mode) and press "OK" to skip this error.
MeGUI: D2V Creator
In RipIt4Me's step 1, you were asked to take note of the audio track numbers. We'll need it here select which audio track(s) to demux - you can select more than one track if you want the encoded file to have multiple audio tracks. Alternatively, you can just select the demux all the tracks and then choose the correct audio track(s) later on.
The default save directory is the same directory as your loaded DVD VOB files - change this if you want to. Select both the "On completion load files", "and close" checkboxes and press the "Queue" button. You are now returned to MeGUI - click on the "Queue" tab and press the "Start" button to start the D2V creation. When processing has finished, the status of the queued job will read "Done" and the created D2V file will be loaded into the AviSynth Script Creator ready for the next step. This can take a while, so please be patient - the status window's progress bar may not move, but don't worry, DGIndex is working

Hide details for Step 4: AviSynth Script CreatorStep 4: AviSynth Script Creator

This step will use MeGUI's AviSynth Script Creator tool to create an AviSynth script. If you followed Step 3, the AviSynth Script Creator tool should already be started with the D2V file created loaded. Otherwise, you'll need to load the media file you want to convert into the "Video Input" section.
AviSynth is able to open almost any video file that you are able to play with a Directshow based multimedia player, such as Media Player Classic or Windows Media Player. You may need to select the "All Files" option when opening the file to be able to see it (eg. FLV files). In most cases, you'll need to install a video codec, an audio codec and a splitter filter for the format you wish to convert.

For example, if you want to convert FLV files using MeGUI, you will first need to make sure you have the required video, audio and splitter filters to make FLV files playable in Windows Media Player. Instructions on how to do this can be found in the FLV playback section of our YouTube, Google Video Download and DivX Conversion Guide.

The "Input DAR" is the aspect ratio of the input video. In most circumstances, it should be automatically set for you. Anamorphic DVDs will be set to "ITU 16:9", for example.
Press the "Auto Crop" button to remove the black bars from the input video if it has any (most widescreen DVDs will).
Next, check the "Suggested Resolution" checkbox and change the resolution to one that you require. For DVD conversion onto a single CD (700 MB) using H.264, you can get away with using the maximum resolution (720x***). If you have specific requirements, such as conversion to iPod/PSP compatible files, please make sure the resolution you select matches your playback device's capabilities.
MeGUI: AviSynth Script Creator


Click on the "Filters" tab. For films on DVDs, you usually do not need to run a deinterlacing analysis. If the content you have is TV based, then you might need to click on the "Analysis" button to see if the video requires de-interlacing. Select "Source is Anime" if that's what you have.
MeGUI: AviSynth Script Creator
Again, if you followed my advice for keeping the resolution for DVD sources, then you don't need either the resize of the noise filters. Otherwise, if you chose to reduce the resolution, then you can choose how the resize will look like ("Bicubic (Neutral)" is recommended as a middle of the road choice). If the source has lots of noise, you can choose to enable the noise filter and choose how much noise is present in your source. The other options can be left alone ("Colour Correction" is automatically checked for D2V input sources).
If your source is not DVD, then you can click on the "Edit" tab and edit the AviSynth script manually to enable audio (you don't need to do this with DVD sources if you have followed this guide, since we have already demuxed the audio using D2V Creator). Simply change the "audio=false" entry to "audio=true".
MeGUI: AviSynth Script Creator


Make sure the "On save close and load to be encoded" option and press the "Save" button to save the AviSynth script (by default, in the same directory as the D2V file, the filename is not important). Don't worry too much about the AviSynth Script Creator tool's preview window - it can be a little buggy where cropping and resizing and concerned. After saving, the AviSynth file should be loaded automatically into MeGUI - MeGUI's preview window does work fine and please make sure the video looks alright, especially for DVD sources with cropping/resize.


Show details for Step 5a: Video Encoding Options MP4Step 5a: Video Encoding Options MP4

Show details for Step 5b: Video Encoding Options XVIDStep 5b: Video Encoding Options XVID

Hide details for Step 6: Audio Encoding OptionsStep 6: Audio Encoding Options

Now it's time to set up the audio encoding options. If you've followed this guide for DVD conversion, then the demuxed audio track we selected in the D2V Creator should already be loaded in (if not, load in the .ac3 file that was created). If you are not converting from a DVD source, then you can either load in a separate audio file or if you edited the AviSynth script (set "audio=true"), then load in the AVS file into the "Audio Input" section (meaning both video and audio inputs are the same AVS file). Repeat if you want a second audio track by clicking on the "2" select option.
MeGUI: Audio
Now we select an audio codec to use. I prefer AAC audio, especially with H.264 as video - AAC is to MP3 what H.264 is to DivX/XviD, better compression + better quality. So which audio codec should you use? I prefer ND AAC (Nero Digital), so select it if you agree with me. We can now choose an audio profile from one of the "NDAAC" options. "NDAAC-HE-64Kbps" is the one I like, as it will give you roughly the same quality as a 128 Kbps MP3 file. You can select one of the "HEPS" (HEv2) profiles if you really want a small file size. The "LC" options offer better compatibility (eg. with iPod/iTunes), but at the cost of file size (still smaller than MP3s though).



Show details for Step 7: AutoEncode and starting the encodingStep 7: AutoEncode and starting the encoding


Show details for MeGUI Custom x264/AVC video profiles. (Updated: 2006-12-21)MeGUI Custom x264/AVC video profiles. (Updated: 2006-12-21)


Url to this pages:
http://nade.dk/web/nade/site.nsf/FramesetHP?readform&wmain=files/Megui